FIELD ENGINEER

2.1 Health, Safety & Environment (HSE)

• Promote and uphold a high standard of HSE conduct on site, and verify that contractor work is planned and executed in accordance with approved JSAs, permits, and the project HSE management plan.
• Identify, report, and follow up hazards, near misses, and incidents promptly and accurately.
• Confirm that contractor permit-to-work and clearing-permit obligations are met before work proceeds, and that environmental and ESG footprint constraints are respected at the work face.
• Stop work where a safety or environmental standard is at risk and escalate without delay.

2.2 Quality, Inspection & Compliance

• Administer and witness inspection and test plans (ITPs); attend hold and witness points and confirm release before downstream work proceeds.
• Verify that materials, workmanship, and installations conform to approved IFC drawings, specifications, and applicable standards.
• Raise and track non-conformances (NCRs); verify close-out and corrective action.
• Maintain redline mark-ups and ensure as-built information is captured progressively and handed to document control.

2.3 Earthworks Scope Oversight

• Oversee bulk earthworks — clearing and grubbing, cut/fill, bulk excavation, placement and compaction of fill — and verify conformance to design surfaces, lines, and levels.
• Oversee drainage, road, and pavement works — subgrade preparation, layer works, proof rolling, culverts, and surface-water management — across the project’s civil fronts.
• Verify earthworks materials and in-situ testing (material classification, moisture conditioning, compaction and density testing) and confirm acceptance against geotechnical criteria before downstream work proceeds.

2.4 Concrete & Structural Works

• Oversee reinforced concrete works across the project — including foundations, footings, pile caps, plinths, equipment bases, slabs, retaining structures, and process-plant structural concrete — in accordance with approved drawings and specifications.
• Verify formwork, reinforcement fixing, and holding-down arrangements prior to pour, and confirm pre-pour hold-point release before concrete placement proceeds.
• Confirm that approved concrete mix designs are used, and witness sampling and testing (slump, temperature, and cube/cylinder casting).
• Oversee concrete placement, compaction, finishing, and curing, and verify post-pour acceptance, dimensional conformance, and rectification of any defects.

2.5 Supervision & Construction Oversight

• Provide front-line technical oversight of contractor activities, confirming alignment to the approved construction methodology and sequence.
• Verify setting-out and survey control in conjunction with the survey team before key activities commence.
• Anticipate and flag interface, access, and sequencing constraints between contractors and work fronts.

2.6 Measurement, Progress & Reporting

• Verify contractor progress against work physically completed at the work face, providing measured site data to the Senior Engineer for progress assessment.
• Maintain accurate and contemporaneous site records — daily diaries, dockets, plant and labour returns, weather, and delay events — to a consistent and auditable standard.
• Contribute field data and observations to the daily, weekly, and monthly construction reporting.

2.7 Technical & Contract Support

• Support the Senior Engineer in the administration of the Request for Information (RFI) and Technical Query (TQ) process, ensuring that contractor-initiated queries are submitted formally for the Owner’s consideration.
• Ensure that construction drawings and technical documents are received, issued, and superseded only through formal document control via the EPCM, and not through informal circulation.
• Provide factual site records and technical input to assist the Senior Engineer in identifying scope-boundary matters, potential variations, and delay events at an early stage.